Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
Grawer Polska Andrzej Wloch
Ul. Sianowska 7,
60-431
Poznan
Poland
Poland
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Media files
Imagefilm Grawer Polska
Contact
Kinga Różańska - International customer service (language Deutsch)
Paweł Miodoński - Production Manager
Please log in
You must be logged in to use matchmaking
Please log in for matchmaking
Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.
Let's get started!
Welcome to Matchmaking. Would you like to get in touch with ?
Our range of products
Product categories
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.325 Embossing machines
Embossing machines
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.330 Embossing presses
Embossing presses
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.335 Hot foil stamping machines
Hot foil stamping machines
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.350 Die-cutting machines
Die-cutting machines
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.385 Die cutting formes
Die cutting formes
- 05 materials
- 05.04 Films / foils
- 05.04.055 Hot stamping foils, stamping foils
Hot stamping foils, stamping foils
- 05 materials
- 05.08 Printing unit interior
- 05.08.060 Embossing formes
Embossing formes
- 05 materials
- 05.11 Embossing and laminating materials
Embossing and laminating materials
Our products
Product category: Hot foil stamping machines, Hot stamping foils, stamping foils
Hot stamping dies
For that purpose, we use both brass dies and magnesium ones. Their performed work is very precise. Due to the brass, even small details are durable. Chemigraphy die is a cheaper and quicker alternative solution, which is a perfect supplement for brass dies.
Product category: Embossing machines, Embossing presses, Die-cutting machines, Die cutting formes, Embossing formes, Embossing and laminating materials
Embossing dies
Embossing dies work using matrice and patrice.
Without agents such as foil and heat in the material we acquire relief, called embossment. To get this, we can use all kinds of dies we produce.
Depending on pattern, quantity and used material, we will be able to select the best die. These might be brass dies with epoxy patrice, chemigraphy dies or polymer dies. Excellent results can be obtained through combining magnesium and polymer dies. In special cases we use both milled elements.
Without agents such as foil and heat in the material we acquire relief, called embossment. To get this, we can use all kinds of dies we produce.
Depending on pattern, quantity and used material, we will be able to select the best die. These might be brass dies with epoxy patrice, chemigraphy dies or polymer dies. Excellent results can be obtained through combining magnesium and polymer dies. In special cases we use both milled elements.
Product category: Embossing machines, Embossing presses, Die-cutting machines, Die cutting formes, Embossing formes, Embossing and laminating materials
3D embossing dies
Dies of this type are designed to produce embossments that are not zero-one.
The effect that we can acquire is not just multi-level embossing, but a relief that completely resembles a flat relief.
This type of engraving looks beautiful either on printed and monochromatic cardboards because the engravings themselves are an excellent decoration on a packaging or elegant business card. The preparation of such files is not different from a default case. We just need additional graphic of the engraved image/pattern in 1:1 scale. These dies are made of brass along with epoxy patrices. When we need to work on very thick material, we replace epoxy patrices with brass ones.
The effect that we can acquire is not just multi-level embossing, but a relief that completely resembles a flat relief.
This type of engraving looks beautiful either on printed and monochromatic cardboards because the engravings themselves are an excellent decoration on a packaging or elegant business card. The preparation of such files is not different from a default case. We just need additional graphic of the engraved image/pattern in 1:1 scale. These dies are made of brass along with epoxy patrices. When we need to work on very thick material, we replace epoxy patrices with brass ones.
Product category: Embossing machines, Embossing presses, Hot foil stamping machines, Die-cutting machines, Die cutting formes, Hot stamping foils, stamping foils, Embossing formes, Embossing and laminating materials
Hot stamping dies with embossment
Is one of the most beautiful ways of refinements there are.
This is a technique that allows to achieve an effect of hot stamping and embossing in just one pass (mostly high embossing). The main advantages of this solution are very little time consumption and flawless matching of hot stamping and embossment. These dies are made of brass in combination of epoxy patrices.
Thanks to this production method, it is also possible to produce 3D embossing , just like in case of simple embossing. Adding to 3D embossing a gold or a transparent film allows to produce extraordinary decorative and elegant refinements.
This is a technique that allows to achieve an effect of hot stamping and embossing in just one pass (mostly high embossing). The main advantages of this solution are very little time consumption and flawless matching of hot stamping and embossment. These dies are made of brass in combination of epoxy patrices.
Thanks to this production method, it is also possible to produce 3D embossing , just like in case of simple embossing. Adding to 3D embossing a gold or a transparent film allows to produce extraordinary decorative and elegant refinements.
Product category: Hot foil stamping machines, Hot stamping foils, stamping foils
Structural dies
This is a special kind of dies to hot foil stamping , which presses a microstructure on the gilded material during applying film.
Structural dies are made of brass and magnesium. Thanks to applying on the matrice a dense braided lines, we can get the result comparable with a hologram on the print.
Important is the fact that these structures can be personalized and created especially for our Customer’s needs. Thanks to this, this method is suitable for counterfeit protection. Beside of this application, it is also very ornamenting so it is also used for packages and holiday cards. Structural dies are also successfully used without foil. By using them for embossing of metallized cartons, which we often see in the packaging industry.
Structural dies are made of brass and magnesium. Thanks to applying on the matrice a dense braided lines, we can get the result comparable with a hologram on the print.
Important is the fact that these structures can be personalized and created especially for our Customer’s needs. Thanks to this, this method is suitable for counterfeit protection. Beside of this application, it is also very ornamenting so it is also used for packages and holiday cards. Structural dies are also successfully used without foil. By using them for embossing of metallized cartons, which we often see in the packaging industry.
Product category: Embossing machines, Embossing presses, Die-cutting machines, Die cutting formes, Embossing formes, Embossing and laminating materials
Braille matrices
These are tools to press the Braille Alphabet.
As a default print, we take the most common and recommended for pharmaceutical packages in Europe font – Marburg Medium. Nonetheless, we can use other fonts upon our Customer’s special request.
We advise to use a monolithic aluminium die as the most optimum solution for installation in a cut die or on separate boards.
A full set of it consists of a die and a brass engraved patrice. The second tool ensures reproducibility of shape, durability and absolute safety that are so much important here.
As a default print, we take the most common and recommended for pharmaceutical packages in Europe font – Marburg Medium. Nonetheless, we can use other fonts upon our Customer’s special request.
We advise to use a monolithic aluminium die as the most optimum solution for installation in a cut die or on separate boards.
A full set of it consists of a die and a brass engraved patrice. The second tool ensures reproducibility of shape, durability and absolute safety that are so much important here.
Product category: Embossing machines, Embossing presses, Hot foil stamping machines, Die-cutting machines, Die cutting formes, Embossing formes, Embossing and laminating materials
Installation systems and memory systems
When ordering a die, please define the way you would like to have it installed in a machine.
If it is supposed to be fixed like a honeycomb, we can chamfer it. Or do you need a “step” to fit it into rails or handles? Will you need to fix it into mounting holes or do you want us just to cut it in 90 degrees because you will stick it to a double-sided duct tape? Dies can be prepared and finished accordingly to our Customer’s wish, but that is not all …
To reduce the set-up time and to increase profitability of the production, we install our hot stamping dies on steel plates (Thinplate) that already with the matrix are just 7 mm thick (that is the same size as a traditional matrix). We can install our hot stamping dies also on Jobsaver plate. Thanks to that, operators do not waste time to positioning dies against sheets in case of reproducible works.
Our pressing/stamping dies can be installed on prepared boards or ready for assembling in a cut die.
If few dies work interchangeably in one cut die, we can use a special memory system that will readjust the settings to the preferable position once every next die is placed in the cut die or the board.
If it is supposed to be fixed like a honeycomb, we can chamfer it. Or do you need a “step” to fit it into rails or handles? Will you need to fix it into mounting holes or do you want us just to cut it in 90 degrees because you will stick it to a double-sided duct tape? Dies can be prepared and finished accordingly to our Customer’s wish, but that is not all …
To reduce the set-up time and to increase profitability of the production, we install our hot stamping dies on steel plates (Thinplate) that already with the matrix are just 7 mm thick (that is the same size as a traditional matrix). We can install our hot stamping dies also on Jobsaver plate. Thanks to that, operators do not waste time to positioning dies against sheets in case of reproducible works.
Our pressing/stamping dies can be installed on prepared boards or ready for assembling in a cut die.
If few dies work interchangeably in one cut die, we can use a special memory system that will readjust the settings to the preferable position once every next die is placed in the cut die or the board.
About us
Company portrait
GRAWER POLAND Embossing and Debossing Tools , brass, magnesium and polymer dies, Thinplate, Jobsaver plate, install dies on boards or for assembly in a cut die.
Thanks to our products it is possible to produce blind and hot foil embossings on paper, cardboards, leathers and ecoleather, wood, and other advertisement. Grawer Poland has been working for the biggest companies from polygraphy and advertising industries for years.
Each die is created and customized for individual customers’ orders
Polymer matrices
These ones are the cheapest and fastest kind of dies in the production process. Polymers are ideal for a matrice/ patrice stamping and in typographic printing. Polymers are both on hard and soft ground.
Magnesium matrices
It is a fast and cheap way for hot foil embossing. Chemigraphy etched matrice can reproduce the finest details that are difficult to copy using any other method. Magnesium is also ideally suited for stamping and typographical print.
Brass dies
Engraved dies are durable and precise tools for hot foil embossing, as well as for all kinds of embossing, including 3D embossing and hot stamping with embossing. These dies are made as flat tools or in cylindrical form.
Thinplate and Jobsaver plate
To reduce the set-up time and to increase profitability of the production, we install our hot stamping dies on steel plates. Thanks to that, operators do not waste time to positioning dies against sheets in case of reproducible works.
Our pressing/stamping dies can be installed on prepared boards or ready for assembling in a cut die.
If few dies work interchangeably in one cut die, we can use a special memory system that will readjust the settings to the preferable position once every next die is placed in the cut die or the board.
The basis of our activities, especially regarding quality, are our customers expectations. Therefore we have introduced the ISO 9001 Quality Management System and the ISO 14001 Environmental Management System.
Thanks to our products it is possible to produce blind and hot foil embossings on paper, cardboards, leathers and ecoleather, wood, and other advertisement. Grawer Poland has been working for the biggest companies from polygraphy and advertising industries for years.
Each die is created and customized for individual customers’ orders
Polymer matrices
These ones are the cheapest and fastest kind of dies in the production process. Polymers are ideal for a matrice/ patrice stamping and in typographic printing. Polymers are both on hard and soft ground.
Magnesium matrices
It is a fast and cheap way for hot foil embossing. Chemigraphy etched matrice can reproduce the finest details that are difficult to copy using any other method. Magnesium is also ideally suited for stamping and typographical print.
Brass dies
Engraved dies are durable and precise tools for hot foil embossing, as well as for all kinds of embossing, including 3D embossing and hot stamping with embossing. These dies are made as flat tools or in cylindrical form.
Thinplate and Jobsaver plate
To reduce the set-up time and to increase profitability of the production, we install our hot stamping dies on steel plates. Thanks to that, operators do not waste time to positioning dies against sheets in case of reproducible works.
Our pressing/stamping dies can be installed on prepared boards or ready for assembling in a cut die.
If few dies work interchangeably in one cut die, we can use a special memory system that will readjust the settings to the preferable position once every next die is placed in the cut die or the board.
The basis of our activities, especially regarding quality, are our customers expectations. Therefore we have introduced the ISO 9001 Quality Management System and the ISO 14001 Environmental Management System.
