Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
Peroni Ruggero Srl
Via Ca' Bassa, 15,
21100
Varese
Italy
Italy
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Media files
WELCOME IN PERONI!On the 1st of January 2018 we moved to the new headquarter, in a larger and modern location which includes also our mechanical workshop and the showroom where we are happy to welcome our Customers.
Contact
Please log in
You must be logged in to use matchmaking
Please log in for matchmaking
Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.
Let's get started!
Welcome to Matchmaking. Would you like to get in touch with ?
Our range of products
Product categories
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.130 Gluing machines
Gluing machines
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.160 Book cover production machines
Book cover production machines
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.245 Ribbon inserting machines
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.410 Grooving machines
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.420 Laminating machines
Laminating machines
- 03 post press / converting / packaging
- 03.02 converting
- 03.02.015 Letter-file making machines
Letter-file making machines
- 03 post press / converting / packaging
- 03.02 converting
- 03.02.060 Stationery manufacturing machines
Stationery manufacturing machines
- 03 post press / converting / packaging
- 03.02 converting
- 03.02.070 Packaging machines for stationery
Packaging machines for stationery
- 03 post press / converting / packaging
- 03.02 converting
- 03.02.195 Box lining and covering machines
Box lining and covering machines
- 03 post press / converting / packaging
- 03.02 converting
- 03.02.200 Box making machines
Box making machines
Our products
Product category: Ribbon inserting machines
AGD-EI/M
Semi-automatic machine in simplified version to thread and glue one flat elastic band onto laying flat agenda and diary cases.
For one single elastic width (5 mm up to 15 mm).
Technical features
Used materials:
- flat covers of agendas, notebooks
- flat elastic band in one single width
- hot-melt glue
Cover thickness:
min. 1 mm – max. 2,5 mm (3,5 mm for foam board cases)
Min case size: 100 mm x 220 mm
Mechanical speed: up to 8pcs/min.
Pneumatic consumption: 80 Nl/min.
For one single elastic width (5 mm up to 15 mm).
Technical features
Used materials:
- flat covers of agendas, notebooks
- flat elastic band in one single width
- hot-melt glue
Cover thickness:
min. 1 mm – max. 2,5 mm (3,5 mm for foam board cases)
Min case size: 100 mm x 220 mm
Mechanical speed: up to 8pcs/min.
Pneumatic consumption: 80 Nl/min.
Product category: Ribbon inserting machines
AGD-EI
Semi-automatic machine to thread and glue one flat elastic band onto laying flat agenda and diary cases.
Technical features
Used materials:
- flat covers of agendas, notebooks and diaries already cased-in (max spine 25mm)
- flat elastic band from 5mm to 15mm
- hot-melt glue
Board thickness: 1 mm to 2,5 mm (3,5 mm for foamed cases)
Mechanical speed: up to 8pcs/min.
Case size range:
min. 83 mm x 120 mm
max. 340 mm x 510 mm
Electrical power req.: 4 Kw
Pneumatic consumption: 150 Nl/min. (7 bar)
Technical features
Used materials:
- flat covers of agendas, notebooks and diaries already cased-in (max spine 25mm)
- flat elastic band from 5mm to 15mm
- hot-melt glue
Board thickness: 1 mm to 2,5 mm (3,5 mm for foamed cases)
Mechanical speed: up to 8pcs/min.
Case size range:
min. 83 mm x 120 mm
max. 340 mm x 510 mm
Electrical power req.: 4 Kw
Pneumatic consumption: 150 Nl/min. (7 bar)
Product category: Ribbon inserting machines
AGD-EI/A
Automatic machine to thread and glue one flat elastic band onto laying flat agenda and diary cases.
Technical features
Used materials:
- flat covers of agendas, notebooks and diaries already cased-in (max spine 25mm)
- flat elastic band from 5mm to 15mm
- hot-melt glue
Board thickness: 1 mm to 2,5 mm (3,5 mm for foamed cases)
Mechanical speed: up to 14 pcs./min.
Technical features
Used materials:
- flat covers of agendas, notebooks and diaries already cased-in (max spine 25mm)
- flat elastic band from 5mm to 15mm
- hot-melt glue
Board thickness: 1 mm to 2,5 mm (3,5 mm for foamed cases)
Mechanical speed: up to 14 pcs./min.
Product category: Ribbon inserting machines
PEN LOOP
Semi-automatic machine to apply one elastic pen loop onto agenda and diary cases or onto already cased-in products by hot-melt.
Product feeding by hand
Cycle for elastic band cutting, glue application, loop shaping and closing as a ring fully automatic.
Technical features
Used materials:
– flat agenda and diary cases or already cased-in products
– flat elastic band 8 mm, 10 mm, 12 mm, 15 mm, 18 mm, 20 mm and 25 mm
Elastic width (standard): 8 mm, 10 mm, 12 mm, 15 mm, 18 mm, 20 mm and 25 mm
Pen loop diameter: min. 8 mm – max. 10 mm
Case thickness: min. 1 mm – max. 3,5 mm
Mechanical speed: up to 8pcs./min.
Power required: 4 Kw
Pneumatic consumption: 100 NL/min. (7 bar)
Product feeding by hand
Cycle for elastic band cutting, glue application, loop shaping and closing as a ring fully automatic.
Technical features
Used materials:
– flat agenda and diary cases or already cased-in products
– flat elastic band 8 mm, 10 mm, 12 mm, 15 mm, 18 mm, 20 mm and 25 mm
Elastic width (standard): 8 mm, 10 mm, 12 mm, 15 mm, 18 mm, 20 mm and 25 mm
Pen loop diameter: min. 8 mm – max. 10 mm
Case thickness: min. 1 mm – max. 3,5 mm
Mechanical speed: up to 8pcs./min.
Power required: 4 Kw
Pneumatic consumption: 100 NL/min. (7 bar)
Product category: Ribbon inserting machines
Semi-automatic machine to glue one pre-shaped document pocket on inside back covers of agendas and diaries.
Technical features
Pocket min size: 83 mm x 136 mm
Pocket max size: 146 mm x 236 mm
Compressed air required: 300 Nl/min.
Mechanical speed: 10pcs./min.
Technical features
Pocket min size: 83 mm x 136 mm
Pocket max size: 146 mm x 236 mm
Compressed air required: 300 Nl/min.
Mechanical speed: 10pcs./min.
!["V" Grooves - SC/M +](https://www.drupa.de/vis-content/event-drupa2020/exh-drupa2020.2681912/virtual.drupa-Peroni-Ruggero-Srl-Image-drupa2020.2681912-tWi7O6VDROOsDqozhlzhRQ-image.png ""V" Grooves - SC/M +")
!["U" Grooves - SC/M +](https://www.drupa.de/vis-content/event-drupa2020/exh-drupa2020.2681912/virtual.drupa-Peroni-Ruggero-Srl-Image-drupa2020.2681912-LMwRZ1Z8TB60ZeEEJ4GNZg-image.png ""U" Grooves - SC/M +")
Product category: Grooving machines, Box making machines, Packaging machines for stationery
SC/M +
Manual equipment to cut the corners of the box blanks and make V & U-shape grooves.
Ideal for mock-up samples and short runs.
Technical features
Corner sizes: max. 120x120mm
Cardboard sizes:
max. 700x700mm (box)
max. 800x700mm (cardboard cover)
Cardboard thickness: min. 1mm – max. 4mm
Grooves:
Nr.1 for grooves a “V” from 80° to 100°
Nr.1 for grooves a “V” from 100° to 130°
Nr.1 for grooves a “U” from 6mm to 8mm (optional)
Wheelbase: no limit
Ideal for mock-up samples and short runs.
Technical features
Corner sizes: max. 120x120mm
Cardboard sizes:
max. 700x700mm (box)
max. 800x700mm (cardboard cover)
Cardboard thickness: min. 1mm – max. 4mm
Grooves:
Nr.1 for grooves a “V” from 80° to 100°
Nr.1 for grooves a “V” from 100° to 130°
Nr.1 for grooves a “U” from 6mm to 8mm (optional)
Wheelbase: no limit
Product category: Box making machines, Grooving machines, Packaging machines for stationery
SC/P 1000
Automatic rotative grooving machine for board cases, supplied with a double feeder, grooving unit for “U” and “V” cuts and a double delivery unit.
Technical features
Cardboard sizes:
min. 130 x 130mm – Max. 700 x 700mm
max. 1.040mm (width) x 700mm, if manually fed
max. 950mm (width) by double feeder
Cardboard thickness:
min. 1mm – max. 4mm
Grooves:
Nr.8 for grooves a “V” from 80° to 130°
for “U” – shape from 6mm to 8mm (optional)
Wheelbase:
min. 70mm – no limits if grooving blades are installed on two bars
Mechanical speed:
40m/min. (from 40 to 260 pcs/min. according to the cardboard size)
Technical features
Cardboard sizes:
min. 130 x 130mm – Max. 700 x 700mm
max. 1.040mm (width) x 700mm, if manually fed
max. 950mm (width) by double feeder
Cardboard thickness:
min. 1mm – max. 4mm
Grooves:
Nr.8 for grooves a “V” from 80° to 130°
for “U” – shape from 6mm to 8mm (optional)
Wheelbase:
min. 70mm – no limits if grooving blades are installed on two bars
Mechanical speed:
40m/min. (from 40 to 260 pcs/min. according to the cardboard size)
Product category: Grooving machines, Box making machines, Packaging machines for stationery
SC/T 1000
Automatic rotative grooving machine for board cases, supplied with a double feeder, grooving unit for “V” and “U” cuts, in-line corner cutting device.
Technical features
Cardboard sizes:
min. 130 x 130mm – max. 700 x 700mm
max. 1.040mm (width) x 700mm, if manually fed
max. 950mm (width) by double feeder
Cardboard thickness:
min. 1mm – max. 4mm
Grooves:
Nr.8 for grooves a “V” from 80° to 130°
for “U” – shape from 6mm to 8mm (optional)
Wheelbase:
min. 70mm – no limits if grooving blades are installed on two bars
Mechanical speed:
40m/min. (from 40 to 260 pcs/min. according to the cardboard size).
Technical features
Cardboard sizes:
min. 130 x 130mm – max. 700 x 700mm
max. 1.040mm (width) x 700mm, if manually fed
max. 950mm (width) by double feeder
Cardboard thickness:
min. 1mm – max. 4mm
Grooves:
Nr.8 for grooves a “V” from 80° to 130°
for “U” – shape from 6mm to 8mm (optional)
Wheelbase:
min. 70mm – no limits if grooving blades are installed on two bars
Mechanical speed:
40m/min. (from 40 to 260 pcs/min. according to the cardboard size).
Product category: Box making machines, Packaging machines for stationery
BOX JOINT
SEMI-AUTOMATIC BOX TAPING MACHINE
Manual unit for the automatic application of one self-adhesive thermal tape as used to keep rigid box corners closed.
BOX JOINT: max tape length 80 mm
BOX JOINT/S: max tape length 180 mm
Technical features
BOX JOINT
Box size range:
min. 50x50x20 mm
max. 450x450x120mm
Tape:
length min. 10mm – max. 80mm
width 22mm
BOX JOINT/S
Box size range:
min. 50x50x20 mm
max. 450x450x240mm
Tape:
length min. 10mm – max. 180mm
width 22mm
Manual unit for the automatic application of one self-adhesive thermal tape as used to keep rigid box corners closed.
BOX JOINT: max tape length 80 mm
BOX JOINT/S: max tape length 180 mm
Technical features
BOX JOINT
Box size range:
min. 50x50x20 mm
max. 450x450x120mm
Tape:
length min. 10mm – max. 80mm
width 22mm
BOX JOINT/S
Box size range:
min. 50x50x20 mm
max. 450x450x240mm
Tape:
length min. 10mm – max. 180mm
width 22mm
Product category: Box lining and covering machines, Box making machines, Packaging machines for stationery
BOX WRAPPER 24
Semi-automatic machine to produce high-quality rigid boxes.
Manual positioning of the glued paper onto the conveyor tape with teflon guides (paper gluing to be made on a separate machine).
Manual positioning of the box onto the glued paper with pneumatic centering device.
Automatic centering & traslation of the materials to the automatic wrapping unit by telescopic conveyor tape.
Automatic wrapping unit.
Pick&Place to move the ready box to the delivery unit.
Here are some features that make the new BOX WRAPPER 24 unique.
It can wrap both very small and very large sizes and it’s the only semi-automatic able to wrap 24cm high boxes.
It is equipped with automatic size change over and the quick release system allows you to replace the mold in a few seconds.
The wrapping system is patented.
Technical features
Materials: paper with gluing surface – max 700 x 1000 mm
Box sizes:
– min. 50x50mm (internal)
– max. 500x500mm (external)
– height min. 20mm – max. 240mm
Paper thickness: 110 – 150gr./m²
Automatic Job-size change over: 3min.
Mechanical speed: 500 cycles/hour
Production capacity: 300/350 wrapped boxes/hour
Manual positioning of the glued paper onto the conveyor tape with teflon guides (paper gluing to be made on a separate machine).
Manual positioning of the box onto the glued paper with pneumatic centering device.
Automatic centering & traslation of the materials to the automatic wrapping unit by telescopic conveyor tape.
Automatic wrapping unit.
Pick&Place to move the ready box to the delivery unit.
Here are some features that make the new BOX WRAPPER 24 unique.
It can wrap both very small and very large sizes and it’s the only semi-automatic able to wrap 24cm high boxes.
It is equipped with automatic size change over and the quick release system allows you to replace the mold in a few seconds.
The wrapping system is patented.
Technical features
Materials: paper with gluing surface – max 700 x 1000 mm
Box sizes:
– min. 50x50mm (internal)
– max. 500x500mm (external)
– height min. 20mm – max. 240mm
Paper thickness: 110 – 150gr./m²
Automatic Job-size change over: 3min.
Mechanical speed: 500 cycles/hour
Production capacity: 300/350 wrapped boxes/hour
Product category: Box lining and covering machines, Box making machines, Packaging machines for stationery
LINEA BOX WRAPPER 24
Automatic simple line to produce wrapped rigid boxes max 24cm high composed by:
Automatic paper feeder;
Gluing unit with automatic viscometer;
Manual positioning of the box onto the glued paper with mechanical centering device;
Automatic centering & traslation of the materials to the automatic wrapping unit by telescopic conveyor tape;
Automatic wrapping unit.
Pick&Place system to move the ready box to the delivery unit.
Moulds for each box’ size can be wooden made and easily installed/removed by a quick-release system.
Technical features
Materials: paper with gluing surface – max 700 x 1000 mm
Box sizes:
- min. 50x50mm (internal)
- max. 500x500mm (external)
- height min. 20mm – max. 240mm
Paper thickness: from 110gr/m². to 150gr/m²
Automatic Job-size change over: 3min.
Mechanical speed: 500 cycles/hour
Production capacity: 350 wrapped boxes/hour
Operator/s req.: nr.1
Automatic paper feeder;
Gluing unit with automatic viscometer;
Manual positioning of the box onto the glued paper with mechanical centering device;
Automatic centering & traslation of the materials to the automatic wrapping unit by telescopic conveyor tape;
Automatic wrapping unit.
Pick&Place system to move the ready box to the delivery unit.
Moulds for each box’ size can be wooden made and easily installed/removed by a quick-release system.
Technical features
Materials: paper with gluing surface – max 700 x 1000 mm
Box sizes:
- min. 50x50mm (internal)
- max. 500x500mm (external)
- height min. 20mm – max. 240mm
Paper thickness: from 110gr/m². to 150gr/m²
Automatic Job-size change over: 3min.
Mechanical speed: 500 cycles/hour
Production capacity: 350 wrapped boxes/hour
Operator/s req.: nr.1
Product category: Box making machines, Packaging machines for stationery
MAG 1
Semi-automatic machine to groove board cases and to apply magnets (or metal plates) by hot glue
- Board case feeding by hand
- 1 to max 6 magnets per side/1 work cycle.
Magnet seat milling, glue application, magnet feeding from charger by fully automatic cycle.
Technical features
Used materials:
- grey board with thickness 1,5 mm up to 4 mm
- magnets with diam. min. 9,5 mm – max 15 mm/thickness 1/1,5/2 mm
Board width: min. 180 mm – max 1550 mm
Production capacity:
- 14 cycles (with 1 magnet)/minute
- 8 cycles (with 2 magnets)/minute
Pneumatic consumption: 150 NL/minute (6 bar)
- Board case feeding by hand
- 1 to max 6 magnets per side/1 work cycle.
Magnet seat milling, glue application, magnet feeding from charger by fully automatic cycle.
Technical features
Used materials:
- grey board with thickness 1,5 mm up to 4 mm
- magnets with diam. min. 9,5 mm – max 15 mm/thickness 1/1,5/2 mm
Board width: min. 180 mm – max 1550 mm
Production capacity:
- 14 cycles (with 1 magnet)/minute
- 8 cycles (with 2 magnets)/minute
Pneumatic consumption: 150 NL/minute (6 bar)
Product category: Box making machines, Packaging machines for stationery
MAG 2
Semi-automatic machine to groove board cases and to apply one or two couples of magnets by hot glue – board case feeding by hand – magnet seat milling, glue application, magnet feeding from charger by fully automatic cycle.
MAG 2/S: Delivery of the processed products on the back side of the machine – Possibility to apply more than 2 couples of magnets per cycle
MAG 2/SR: Including the application of one ribbon (loop) onto the board case
Technical features
Used materials:
- grey board with thickness 1,5 mm up to 4 mm
- magnets with diam. min. 9,5 mm max 15 mm /thickness 1/1,5/2 mm
Board width: min. 270 mm – max 1200 mm
Magnet distance: min. 240 mm – max 900 mm
Production capacity:
- 14 cycles (with 2 magnets)/minute
- 8 cycles (with 4 magnets)/minute
Pneumatic consumption: 250 NL/minute (6 bar)
MAG 2/S: Delivery of the processed products on the back side of the machine – Possibility to apply more than 2 couples of magnets per cycle
MAG 2/SR: Including the application of one ribbon (loop) onto the board case
Technical features
Used materials:
- grey board with thickness 1,5 mm up to 4 mm
- magnets with diam. min. 9,5 mm max 15 mm /thickness 1/1,5/2 mm
Board width: min. 270 mm – max 1200 mm
Magnet distance: min. 240 mm – max 900 mm
Production capacity:
- 14 cycles (with 2 magnets)/minute
- 8 cycles (with 4 magnets)/minute
Pneumatic consumption: 250 NL/minute (6 bar)
Product category: Box making machines, Packaging machines for stationery
MAG 40
Fully automatic machine to groove board seats and to apply 2 or 4 magnets by using hot-melt glue.
Board cases and magnets fed from proper chargers by automatic cycle.
Supplied with final (nested) collecting unit of the end products.
Technical features
Used materials:
- grey board with thickness from 1,5 mm up to 4 mm
- magnets with diam. min 9,5 mm and max 15 mm/thickness 1mm, 1,5mm and 2 mm
Board size range:
min. 230 mm x 150 mm
max 800 mm x 400 mm
Magnet distance: min. 180 mm – max 750 mm
Production:
- 40 pieces/minute (with 2 magnets)
- 20 pieces/minute (with 4 magnets)
Pneumatic consumption: 350 NL/minute (6 bar)
Board cases and magnets fed from proper chargers by automatic cycle.
Supplied with final (nested) collecting unit of the end products.
Technical features
Used materials:
- grey board with thickness from 1,5 mm up to 4 mm
- magnets with diam. min 9,5 mm and max 15 mm/thickness 1mm, 1,5mm and 2 mm
Board size range:
min. 230 mm x 150 mm
max 800 mm x 400 mm
Magnet distance: min. 180 mm – max 750 mm
Production:
- 40 pieces/minute (with 2 magnets)
- 20 pieces/minute (with 4 magnets)
Pneumatic consumption: 350 NL/minute (6 bar)
Product category: Box making machines, Packaging machines for stationery
SWP-1000
Side Wings Production.
Newly designed automatic line for the production of Wrapped Side Wings for Collapsible Boxes, composed by:
High pile automatic die-cut paper feeder and glue rollers completed with glue tank unit and viscometer.
Vacuum belt for the glued paper transport.
Automatic board feeder for the 5 components of the side wings.
SCARA Robot e System Vision with camera to pick and place the 5 boards on the glued paper and subsequent positioning in the edge-wrapping unit.
Side wings edge-wrapping unit.
Pressing and delivery station of the ready products.
Technical features
Materials: die-cut paper, board, soft board, animal glue
Paper thickness: from 110gr/m². to 150gr/m²
Board thickness: from 1,5 to max 2,5 mm
Soft board weight: min 350gr/m²
Job-size change over: 20 min
Mechanical speed: up to 900 side wings/hour (subject to sizes, materials and operator)
Operator/s req.: nr.1
Newly designed automatic line for the production of Wrapped Side Wings for Collapsible Boxes, composed by:
High pile automatic die-cut paper feeder and glue rollers completed with glue tank unit and viscometer.
Vacuum belt for the glued paper transport.
Automatic board feeder for the 5 components of the side wings.
SCARA Robot e System Vision with camera to pick and place the 5 boards on the glued paper and subsequent positioning in the edge-wrapping unit.
Side wings edge-wrapping unit.
Pressing and delivery station of the ready products.
Technical features
Materials: die-cut paper, board, soft board, animal glue
Paper thickness: from 110gr/m². to 150gr/m²
Board thickness: from 1,5 to max 2,5 mm
Soft board weight: min 350gr/m²
Job-size change over: 20 min
Mechanical speed: up to 900 side wings/hour (subject to sizes, materials and operator)
Operator/s req.: nr.1
Product category: Box making machines, Packaging machines for stationery
JOLLY BOX EL
Automatic line for the application of wrapped rigid boxes onto turned edge cardboard flats and for the assembling of collapsible boxes wuth side wings.
Technical features
Materials:
- wrapped cardboard flats
- wrapped rigid boxes
- wrapped side wings
Job-size change over: 20 min.
Production capacity (book boxes): min. 900 boxes/hour (subject to sizes, materials and operator)
Operator/s req.: nr.1
Production capacity (collapsible boxes): min. 600 boxes/hour (subject to sizes, materials and operator)
Operator/s req.: nr.2
Pneumatic consumption: 500 NL/minute (6 bar)
Technical features
Materials:
- wrapped cardboard flats
- wrapped rigid boxes
- wrapped side wings
Job-size change over: 20 min.
Production capacity (book boxes): min. 900 boxes/hour (subject to sizes, materials and operator)
Operator/s req.: nr.1
Production capacity (collapsible boxes): min. 600 boxes/hour (subject to sizes, materials and operator)
Operator/s req.: nr.2
Pneumatic consumption: 500 NL/minute (6 bar)
Product category: Box making machines, Packaging machines for stationery
JOLLY BOX 40
Automatic line to assemble rigid boxes and collapsible boxes in 1 or 2 parts.
Ideal to manufacture paper-coated luxury packages (even supplied with magnetic closure) as cases and gift boxes for wine, jewels, liqueurs, perfumes – High-capacity equipment running 40 cycles/minute (mechanical speed).
Technical features
Materials to process:
– box board flats already paper-coated (grooved and with magnets)
– with thickness min 1.2 mm up to max 2 mm
Coated flat size range:
min. 400 mm x 220 mm
max 840 mm x 520 mm
– Rigid tray measuring min. 140 mm x 220 mm – max 360 mm x 520 mm Height min 40 mm – max 100 mm
– Collapsible tray already paper-coated in 1 or 2 parts measuring min 400 mm x 220 mm – max 840 mm x 520 mm
Ready box size range:
- for rigid boxes min 140 mm x 200 mm – max 360 mm x 520 mm Height 40 mm up to 100 mm
- for collapsible boxes in one part min 120 mm x 140 mm max 360 mm x 440 mm Height 40 mm up to 130 mm
- for collapsible boxes in two parts min 140 mm x 220 mm max 360 mm x 520 mm Height 40 mm up to 130 mm
Gluing: by hot-melt employing Nr 3 glue tanks and Nr. 14 glue guns
Production capacity: up to max 35 cycles/minute for all kinds of boxes
Compressed air required: 300 Nl/minute
Ideal to manufacture paper-coated luxury packages (even supplied with magnetic closure) as cases and gift boxes for wine, jewels, liqueurs, perfumes – High-capacity equipment running 40 cycles/minute (mechanical speed).
Technical features
Materials to process:
– box board flats already paper-coated (grooved and with magnets)
– with thickness min 1.2 mm up to max 2 mm
Coated flat size range:
min. 400 mm x 220 mm
max 840 mm x 520 mm
– Rigid tray measuring min. 140 mm x 220 mm – max 360 mm x 520 mm Height min 40 mm – max 100 mm
– Collapsible tray already paper-coated in 1 or 2 parts measuring min 400 mm x 220 mm – max 840 mm x 520 mm
Ready box size range:
- for rigid boxes min 140 mm x 200 mm – max 360 mm x 520 mm Height 40 mm up to 100 mm
- for collapsible boxes in one part min 120 mm x 140 mm max 360 mm x 440 mm Height 40 mm up to 130 mm
- for collapsible boxes in two parts min 140 mm x 220 mm max 360 mm x 520 mm Height 40 mm up to 130 mm
Gluing: by hot-melt employing Nr 3 glue tanks and Nr. 14 glue guns
Production capacity: up to max 35 cycles/minute for all kinds of boxes
Compressed air required: 300 Nl/minute
Product category: Gluing machines, Book cover production machines
PWS-EVO 70/120
Gluing, case-making and labelling lines.
Newly developed automatic casemaking & lining machine to manufacture covers both in one piece and in several panels.
High accuracy, 900 covers per hour, Job change-over very quick and easy.
One piece cover:
format min. 170 x 120mm – max 1200 x 700mm
Three pieces cover:
single piece measures min. 10 x 120mm – max 500 x 700mm
Five pieces cover:
single piece measures min. 40 x 120mm – max 500 x 700mm
Newly developed automatic casemaking & lining machine to manufacture covers both in one piece and in several panels.
High accuracy, 900 covers per hour, Job change-over very quick and easy.
One piece cover:
format min. 170 x 120mm – max 1200 x 700mm
Three pieces cover:
single piece measures min. 10 x 120mm – max 500 x 700mm
Five pieces cover:
single piece measures min. 40 x 120mm – max 500 x 700mm
Product category: Gluing machines
COVER 900
Automatic case-making or lining machine (hot animal glue or cold vinylic glue) – Double material transition
Technical features
Material:
- grey board
- paper
- coated paper
- polypropylene or similar
Cardboard thickness: 1 mm to 4 mm
Cover material thickness: 80 to 130 gr/sqm
Capacity: up to 50 pieces/min.
Compressed air: 250 NL/min. (pressure 7 bar)
Technical features
Material:
- grey board
- paper
- coated paper
- polypropylene or similar
Cardboard thickness: 1 mm to 4 mm
Cover material thickness: 80 to 130 gr/sqm
Capacity: up to 50 pieces/min.
Compressed air: 250 NL/min. (pressure 7 bar)
Product category: Gluing machines
LINEA COVER 900
Automatic case-making & lining machine in line (hot animal glue & cold vinylic glue)
(COVER 900 + TOP 900)
Technical features
Material:
- grey board
- paper
- coated paper
- polypropylene or similar
Cardboard thickness: 1 mm to 4 mm
Cover material thickness: 80 to 130 gr/sqm
Capacity: up to 50 cycles/min.
Electrical power req.: 17Kw
Compressed air: 300 NL/min. (pressure 7 bar)
(COVER 900 + TOP 900)
Technical features
Material:
- grey board
- paper
- coated paper
- polypropylene or similar
Cardboard thickness: 1 mm to 4 mm
Cover material thickness: 80 to 130 gr/sqm
Capacity: up to 50 cycles/min.
Electrical power req.: 17Kw
Compressed air: 300 NL/min. (pressure 7 bar)
Product category: Laminating machines
PLS-EVO 70/120-M
Semi-automatic machine for lining equipped with:
High stack paper automatic feeder
Gluing Unit for cold and hot animal glue (glue-tank, pre-melter, viscosity control, glue rollers internally heated)
Suction conveyor belt to handle the glued paper.
Cardboard automatic feeder.
Rolling press calender and delivery unit.
High stack paper automatic feeder
Gluing Unit for cold and hot animal glue (glue-tank, pre-melter, viscosity control, glue rollers internally heated)
Suction conveyor belt to handle the glued paper.
Cardboard automatic feeder.
Rolling press calender and delivery unit.
Product category: Laminating machines
PLS-EVO 70/120
Automatic machine for Lining (inside gluing), at 15 cycles/minute.
Paper high-pile feeder.
Gluing Unit for cold and hot animal glue (glue-tank, pre-melter, viscosity control, glue rollers internally heated)
Suction conveyor belt to handle the glued paper.
Cardboard automatic feeder.
SCARA robot and Vision System for picking and placing the cardboard on the glued paper.
Rolling press calender and delivery unit.
Technical features
Used materials:
- cardboard
- paper
- laminated paper
- hot animal glue, cold glue
Cardboard:
cover size min. 170 x 120 mm – max 1200 x 700 mm
thickness 1 – 4mm
Paper:
min. 210 x 160 mm – max 1200 x 700 mm
thickness 100 – 150 gsm
Accuracy: ± 0,5 mm
Job change-over time: 10-15mins.
Production capacity: 900 covers/hour (indicative data subject to size, materials and operator skill)
Operators needed: 1
Paper high-pile feeder.
Gluing Unit for cold and hot animal glue (glue-tank, pre-melter, viscosity control, glue rollers internally heated)
Suction conveyor belt to handle the glued paper.
Cardboard automatic feeder.
SCARA robot and Vision System for picking and placing the cardboard on the glued paper.
Rolling press calender and delivery unit.
Technical features
Used materials:
- cardboard
- paper
- laminated paper
- hot animal glue, cold glue
Cardboard:
cover size min. 170 x 120 mm – max 1200 x 700 mm
thickness 1 – 4mm
Paper:
min. 210 x 160 mm – max 1200 x 700 mm
thickness 100 – 150 gsm
Accuracy: ± 0,5 mm
Job change-over time: 10-15mins.
Production capacity: 900 covers/hour (indicative data subject to size, materials and operator skill)
Operators needed: 1
Product category: Laminating machines
TOP 800
Automatic lining machine (cold vinylic glue)
Quick and easy job change-over, no matrixes needed when sizes change.
Technical features
Material:
- outside coated board
- paper
- laminated paper
- polypropylene or similar
Cardboard thickness: 1 mm to 4 mm
Lining material thickness: 80 up to 130 gr/sqm
Capacity: up to 80 cycles/min.
Compressed air: 900 NL/min. (pressure 7 bar)
Quick and easy job change-over, no matrixes needed when sizes change.
Technical features
Material:
- outside coated board
- paper
- laminated paper
- polypropylene or similar
Cardboard thickness: 1 mm to 4 mm
Lining material thickness: 80 up to 130 gr/sqm
Capacity: up to 80 cycles/min.
Compressed air: 900 NL/min. (pressure 7 bar)
Product category: Laminating machines
TOP 900
Automatic lining machine (cold vinylic glue and/or warm glue)
High production equipment, no matrixes (clichés) need, no-stop paper loading from the top
Technical features
Material:
- outside coated board
- paper
- laminated paper
- polypropylene or similar
Cardboard thickness: 1 mm to 4 mm
Lining material thickness: 80 up to 130 gr/sqm
Capacity: up to 50 cycles/min.
Compressed air: 150NL/min. (pressure 7 bar)
High production equipment, no matrixes (clichés) need, no-stop paper loading from the top
Technical features
Material:
- outside coated board
- paper
- laminated paper
- polypropylene or similar
Cardboard thickness: 1 mm to 4 mm
Lining material thickness: 80 up to 130 gr/sqm
Capacity: up to 50 cycles/min.
Compressed air: 150NL/min. (pressure 7 bar)
Product category: Stationery manufacturing machines
MODULO 200
Fully automatic creasing (2 creases) and ring-metal riveting line – High production capacity equipment
Technical features
Materials:
- coated board
- fiber board or similar
- ring-mechanisms and Auto- punching rivets with cap standard range
Cardboard thickness: 1 mm to 3,5 mm
Capacity: up to 65 cycles/min.
Electrical power req.: 10 Kw
Compressed air: 150 NL/min. (pressure 7 bar)
Technical features
Materials:
- coated board
- fiber board or similar
- ring-mechanisms and Auto- punching rivets with cap standard range
Cardboard thickness: 1 mm to 3,5 mm
Capacity: up to 65 cycles/min.
Electrical power req.: 10 Kw
Compressed air: 150 NL/min. (pressure 7 bar)
Product category: Stationery manufacturing machines
MODULO 400
Fully automatic modular line for lever-arch file assembling (high speed equipment)
Technical features
Materials:
- coated board
- fiber board or similar
- finger eyelets
- rado eyelets
- lever-arch mechanisms and compressor bars standard range
Cardboard thickness: 1 mm to 3,5 mm
Capacity: up to 50 pieces/min.
Electrical power req.: depending on line assembly
Compressed air: depending on line assembly
Technical features
Materials:
- coated board
- fiber board or similar
- finger eyelets
- rado eyelets
- lever-arch mechanisms and compressor bars standard range
Cardboard thickness: 1 mm to 3,5 mm
Capacity: up to 50 pieces/min.
Electrical power req.: depending on line assembly
Compressed air: depending on line assembly
Product category: Stationery manufacturing machines
MODULO 400 SIMPLEX
Automatic line to manufacture lever-arch files, supplied with the following work units:
creasing, finger ring and rado applying, riveting of lever-arch mechanisms, transport tapes and product collection for compressor bar put in by hand, product folding –
Capacity: 40 cycles/minute
Technical features
Used Materials:
- coated board
- grey board or similar
- finger Ring
- rado Eyelet
- lever-arch Mechanisms according to standard product range available on the market
Board thickness: 1 mm up to 3,5 mm
Production: up to 40 pieces/min.
Pneumatic consumption: according to the line assembled units
creasing, finger ring and rado applying, riveting of lever-arch mechanisms, transport tapes and product collection for compressor bar put in by hand, product folding –
Capacity: 40 cycles/minute
Technical features
Used Materials:
- coated board
- grey board or similar
- finger Ring
- rado Eyelet
- lever-arch Mechanisms according to standard product range available on the market
Board thickness: 1 mm up to 3,5 mm
Production: up to 40 pieces/min.
Pneumatic consumption: according to the line assembled units
Product category: Stationery manufacturing machines
UNICART/S
Automatic line to assemble folders in one single die-cut piece, having one straight round elastic band with 2 rounded metal tags.
Technical features
Materials:
- die-cut folders with thickness 0,35 up to 0,70 mm (300, 400 and 550 gr/mq)
- round elastic band 1,8 mm up to 2,5 mm diameter
- metal tags PE22-N2
Capacity: up to 20 cycles/min.
Compressed air: 800 NL/min. (pressure 7 bar)
Technical features
Materials:
- die-cut folders with thickness 0,35 up to 0,70 mm (300, 400 and 550 gr/mq)
- round elastic band 1,8 mm up to 2,5 mm diameter
- metal tags PE22-N2
Capacity: up to 20 cycles/min.
Compressed air: 800 NL/min. (pressure 7 bar)
Product category: Stationery manufacturing machines
LINEA ELAP 15
Automatic line for creasing folders, automatically riveting two side flaps and fastening one elastic band 15 mm wide.
(CORD-R+FLAP15+ELAP15)
Technical features
Material:
- coated board
- fiber board or similar
- rivets with cap or auto-punching eyelets
- elastic band 15 mm wide
Cardboard thickness: 1 mm to 2,5 mm
Capacity: up to 18 cycles/min. (with 2 rivets/eyelets per flap)
Electrical power req.: 3,7 Kw
(CORD-R+FLAP15+ELAP15)
Technical features
Material:
- coated board
- fiber board or similar
- rivets with cap or auto-punching eyelets
- elastic band 15 mm wide
Cardboard thickness: 1 mm to 2,5 mm
Capacity: up to 18 cycles/min. (with 2 rivets/eyelets per flap)
Electrical power req.: 3,7 Kw
About us
Company portrait
For over 40 years we have been developing machinery inspired by the passion for the Made in Italy.
Each phase of the project takes place within our company, from the development of the idea to the realization of the mechanical parts up to the assembly of the machines, to take care of the smallest details and guarantee quality and reliability, ensuring our customers an immediate and effective after-sales service.
Each phase of the project takes place within our company, from the development of the idea to the realization of the mechanical parts up to the assembly of the machines, to take care of the smallest details and guarantee quality and reliability, ensuring our customers an immediate and effective after-sales service.
Company data
Number of employees
20-49
Foundation
1979
