Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
Seiko Instruments GmbH
Siemensstr. 9,
63263
Neu-Isenburg
Germany
Germany
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Media files
Seiko Image VideoCompany Introduction with focus on Digital Printheads
Contact
Aliasgar Eranpurwala
Head of Sales
Printek
Printek
Sandra Castro
Area Sales Manager
Printek
Printek
Jens Heermann
Area Sales Manager
Printek
Printek
Ryoichiro Yamashita
Technical Support Manager
Printek
Printek
Guillaume Guinot
Technical Support Engineer
Printek
Printek
Stephanie Rohn
Marketing Manager
Printek
Printek
Please log in
You must be logged in to use matchmaking
Please log in for matchmaking
Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.
Let's get started!
Welcome to Matchmaking. Would you like to get in touch with ?
Online events
There are currently no events available.
22
Apr
Analog to Digital - Inkjet Printing of Aqueous Varnish
Go to the online event
This panel discussion focuses on the collaboration of 4 companies who have developed a small web press that selectively prints water-based glossy varnish onto a pre-printed web using digital inkjet printing. This web press demonstrates the possibility of a digital offline finishing device.
Our range of products
Product categories
- 01 prepress / print
- 01.12 Digital printing machines and digital printing systems
- 01.12.010 Inkjet
Inkjet
- 01 prepress / print
- 01.12 Digital printing machines and digital printing systems
- 01.12.015 Web-fed inkjet printing systems
Web-fed inkjet printing systems
- 01 prepress / print
- 01.12 Digital printing machines and digital printing systems
- 01.12.020 Sheet-fed inkjet printing systems
Sheet-fed inkjet printing systems
- 01 prepress / print
- 01.12 Digital printing machines and digital printing systems
- 01.12.030 Inkjet photo printers
Inkjet photo printers
- 01 prepress / print
- 01.12 Digital printing machines and digital printing systems
- 01.12.050 Inkjet – coating
- 01 prepress / print
- 01.12 Digital printing machines and digital printing systems
- 01.12.055 Inkjet – Direct to Shape
Inkjet – Direct to Shape
- 01 prepress / print
- 01.12 Digital printing machines and digital printing systems
- 01.12.060 Inkjet varnish
Inkjet varnish
- 01 prepress / print
- 01.12 Digital printing machines and digital printing systems
- 01.12.065 Inkjet foiling
Inkjet foiling
- 01 prepress / print
- 01.12 Digital printing machines and digital printing systems
- 01.12.100 Digital finishing
Digital finishing
- 01 prepress / print
- 01.15 Printing machines and systems for special printing applications
- 01.15.025 Printing machines for tin printing
Printing machines for tin printing
- 01 prepress / print
- 01.15 Printing machines and systems for special printing applications
- 01.15.030 Printing machines for label printing
Printing machines for label printing
- 01 prepress / print
- 01.15 Printing machines and systems for special printing applications
- 01.15.035 Printing machines for printed electronics
Printing machines for printed electronics
- 01 prepress / print
- 01.15 Printing machines and systems for special printing applications
- 01.15.055 Printing technology for Braille
Printing technology for Braille
- 01 prepress / print
- 01.15 Printing machines and systems for special printing applications
- 01.15.085 Coating machines
- 01 prepress / print
- 01.15 Printing machines and systems for special printing applications
- 01.15.100 Corrugated board printing and converting systems
Corrugated board printing and converting systems
- 04 future technologies
- 04.05 3D-print
- 04.05.025 BJ (binder jetting)
BJ (binder jetting)
- 05 materials
- 05.06 Ink, varnish, toner
- 05.06.120 Digital inks – Water-based
Digital inks – Water-based
- 05 materials
- 05.06 Ink, varnish, toner
- 05.06.150 Digital inks – for industrial print applications
Digital inks – for industrial print applications
- 06 equipment / services / infrastructure
- 06.01 Peripheral equipment
- 06.01.395 Inkjet system integration
Inkjet system integration
- 06 equipment / services / infrastructure
- 06.01 Peripheral equipment
- 06.01.405 Inkjet heads
Inkjet heads
Our products
Product category: Inkjet, Web-fed inkjet printing systems, Sheet-fed inkjet printing systems, Inkjet photo printers, Inkjet – coating, Inkjet – Direct to Shape, Inkjet varnish, Inkjet foiling, Digital finishing, Printing machines for tin printing, Printing machines for label printing, Printing machines for printed electronics, Printing technology for Braille, Coating machines, Corrugated board printing and converting systems, BJ (binder jetting), Digital inks – Water-based, Digital inks – for industrial print applications, Inkjet system integration, Inkjet heads
RC1536 Recirculation Series of Printheads
-NOW ALSO FOR WATER-BASED INKS-
A WIDE RANGE of usable VISCOSITIES, PARTICLE SIZES and DROP VOLUMES enables to create outstanding digital effects such as VARNISH, WHITE, METALLIC and more. Adaptable to a variety of applications like CERAMICS, CORRUGATED CARDBOARD, TEXTILES, 3D-PRINT, PRINTED ELECTRONICS and much more.
A WIDE RANGE of usable VISCOSITIES, PARTICLE SIZES and DROP VOLUMES enables to create outstanding digital effects such as VARNISH, WHITE, METALLIC and more. Adaptable to a variety of applications like CERAMICS, CORRUGATED CARDBOARD, TEXTILES, 3D-PRINT, PRINTED ELECTRONICS and much more.
- DROP VOLUME RANGE: 13 to 225 pL
- MAX. PRODUCTIVITY AT 10 DROPS: 1.500 µL/sec resp. = 2.477 µL/sec
- DISCHARGE AT 25 M/MIN: 60 g/m² resp. 85 g/m²
- USABLE INK TYPES: Oil-, UV-, Solvent- and WATER-based
- POSSIBLE PRINT DIRECTIONS: Vertical and HORIZONTAL
- NUMBER OF GREY LEVELS: up to 10
- JETTING FREQUENCY: up to 37 kHz
- NATIVE NOZZLE RESOLUTION: 360 npi
- ACTIVE NOZZLES: 1.536 at 4 rows
- INK INLETS / INK OUTLETS: 1/1
- PRINTH WIDTH: 108,3 mm
- PRINTHEAD WEIGHT: less than 700 g
- DIMENSIONS: 180,0 x 47,6 x 123,3 mm
- DRIVING INTERFACE: Parallel interface
Product category: Inkjet, Printing machines for label printing, Inkjet heads, Web-fed inkjet printing systems, Sheet-fed inkjet printing systems, Inkjet – coating, Inkjet – Direct to Shape, Inkjet varnish, Inkjet foiling, Digital finishing, Printing machines for tin printing, Coating machines, Corrugated board printing and converting systems, Digital inks – Water-based, Digital inks – for industrial print applications, Inkjet system integration
1024HG Greyscale Series of Printheads
SPACE-SAVING AND FAST in CODING AND MARKING applications.
Printing two colors simultaneously with one printhead HALVES THE NUMBER OF NEEDED PRINTHEADS and raises the productivity for CODING AND MARKING applications up to HIGH-SPEED PRINTING at the same time.
Printing two colors simultaneously with one printhead HALVES THE NUMBER OF NEEDED PRINTHEADS and raises the productivity for CODING AND MARKING applications up to HIGH-SPEED PRINTING at the same time.
- DROP VOLUME: 1024HG-S = 8 pL 1024HG-L = 28 pL @ 1 drop binary, 6m/s
- NATIVE NOZZLE RESOLUTION: 180 npi (2 colors) 360 npi (1 color)
- USABLE INK TYPES: Oil-, UV-, Sovlent-based
- POSSIBLE PRINT DIRECTIONS: Vertical and HORIZONTAL
- NUMBER OF GREY LEVELS: 8
- JETTING FREQUENCY: TBD
- ACTIVE NOZZLES: 1024 at 4 rows
- INK INLETS: 2
- PRINT WIDTH: 72.17 mm
- PRINTHEAD WEIGHT: less than 570 g
- DIMENSIONS: 137.0 x 38.0 x 115.7 mm
- DRIVING INTERFACE: Parallel interface, I2C-compatible serial communication
Product category: Inkjet heads, Inkjet, Inkjet – Direct to Shape, Digital inks – for industrial print applications, Inkjet system integration
254GS Greyscale Series of Printheads
COMPACT HIGH-SPEED PRINTING of MOST DENSELY MICRO BARCODES and 2D-CODES. SMALL and QUICK in EACH PRINT DIRECTION.
Up to a maximum print with of 35.6 mm. High density @ High speed - 180 dpi x 50 pL @ 12 kHz.
Up to a maximum print with of 35.6 mm. High density @ High speed - 180 dpi x 50 pL @ 12 kHz.
- DROP VOLUME RANGE: 13 to 50 pL
- USABLE INK TYPES: Oil-, UV-, Sovlent-based
- POSSIBLE PRINT DIRECTIONS: Vertical and HORIZONTAL
- NUMBER OF GREY LEVELS: 5
- JETTING FREQUENCY: up to 18 kHz
- NATIVE NOZZLE RESOLUTION: 180 npi
- ACTIVE NOZZLES: 254 at 2 rows
- INK INLETS: 1
- PRINT WIDTH: 35.70 mm
- PRINTHEAD WEIGHT: less than 140 g
- DIMENSIONS: 97.0 x 15.0 x 96.2 mmz
- DRIVING INTERFACE: Parallel interface
Product category: Inkjet, Inkjet – Direct to Shape, Inkjet varnish, Inkjet foiling, Digital finishing, Printing machines for tin printing, Corrugated board printing and converting systems, Digital inks – Water-based, Digital inks – for industrial print applications, Inkjet system integration, Inkjet heads
508GS Greyscale Series Of Printheads
OUR ALLROUNDER for highly diverse applications like TEXTILE, CODING & MARKING, PHARMACEUTICAL, CARDBOARD and much more.
Compatible with WATER-, UV-, SOLVENT- and OIL-based ink within a DROP VOLUME RANGE FROM 12 TO 84 pL this EXTREMELY VERSATILE printhead is highly adaptable to most different applications like TEXTILE, CODING & MARKING, PHARMACEUTICAL, CARDBOARD and much more.
Compatible with WATER-, UV-, SOLVENT- and OIL-based ink within a DROP VOLUME RANGE FROM 12 TO 84 pL this EXTREMELY VERSATILE printhead is highly adaptable to most different applications like TEXTILE, CODING & MARKING, PHARMACEUTICAL, CARDBOARD and much more.
- DROP VOLUME RANGE: 12 to 84 pL
- USABLE INK TYPES: Oil-, UV-, Solvent- and WATER-based
- POSSIBLE PRINT DIRECTIONS: Vertical and HORIZONTAL
- MAXIMUM PRODUCTIVITY: [320µ/sec]/head
- NUMBER O GREY LEVELS: 4
- JETTING FREQUENCY: 1 drop (binary) = 28 kHz; 2 drops (binary) = 24 kHz; 3 drops (binary) = 18 kHz; Greyscale (4 level) = 14 khZ
- NATIVE NOZZLE RESOLUTION: 180 npi
- ACTIVE NOZZLES: 508
- INK INLETS: 1
- PRINT WIDTH: 71,54 mm
- PRINTHEAD WEIGHT: less than 300 g
- DIMENSIONS: 121,0 x 28,2 x 123,6 mm
- DRIVING INTERFACE: Parallel Interface
- HEATER: optional
Product category: Inkjet, Inkjet – Direct to Shape, Digital inks – for industrial print applications, Inkjet system integration, Inkjet heads
510BN Binary Series Of Printheads
STABLE UNDER HARSH CONDITIONS with a DURABLE CONTRAST FOR EFFECTIVE READABILITY OF BARCODES and 2D-CODES.
The PRINT WIDTH OF 72 MM and a DROP VOLUME RANGE OF UP TO 80 pL makes it the right solution for LARGE FORMAT CODING AND MARKING with a DURABLE CONTRAST FOR EFFECTIVE READABILITY OF BARCODES and 2D-CODES.
The PRINT WIDTH OF 72 MM and a DROP VOLUME RANGE OF UP TO 80 pL makes it the right solution for LARGE FORMAT CODING AND MARKING with a DURABLE CONTRAST FOR EFFECTIVE READABILITY OF BARCODES and 2D-CODES.
- DROP VOLUMES: 35 pL or 80 pL
- USABLE INK TYPES: Oil-, UV-, Solvent-based
- POSSIBLE PRINT DIRECTIONS: Vertical and HORIZONTAL
- JETTING FREQUENCY: 35 pL = up to 8 kHz; 80 pL = up to 4 kHz
- NATIVE NOZZLE RESOLUTION: 180 npi
- ACTIVE NOZZLES: 510
- INK INLETS: 1
- PRINT WIDTH: 71,9 mm
- PRINTHEAD WEIGHT: less than 200 g
- DIMENSIONS: 126,2 x 31,3 x 106,8 mm
- DRIVING INTERFACE: Parallel Interface
- HEATER: optional
Company news
Date
Topic
20 Apr 2021
Supporting sustainability and respecting the envirionment
READ OUR INTERVIEW with MR. JAVIER GAYA (CEO) from People&Technology.
Supporting sustainability and respecting the environment.
Working hand in hand towards a future where LESS becomes MORE.
We all can agree that the printing industry is not one of the most environmentally friendly industries, and we all know this reality.
It is however in our hands and it is up to each one of us, to work towards the protection of the environment not as a matter of routine, but as our own initiative. And at the same time, this self-conception generally leads to the review of processes that usually bring considerable savings in time and also costs to our companies.
In short, we believe that it is possible to generate profits by taking care of the planet.
We spoke to Mr. Javier Gaya (CEO), from the Spanish-based company People & Technology, a company that is very committed to providing solutions for exactly the kind of environmental challenge we are taking up on our heads.
Supporting sustainability and respecting the environment.
Working hand in hand towards a future where LESS becomes MORE.
We all can agree that the printing industry is not one of the most environmentally friendly industries, and we all know this reality.
It is however in our hands and it is up to each one of us, to work towards the protection of the environment not as a matter of routine, but as our own initiative. And at the same time, this self-conception generally leads to the review of processes that usually bring considerable savings in time and also costs to our companies.
In short, we believe that it is possible to generate profits by taking care of the planet.
We spoke to Mr. Javier Gaya (CEO), from the Spanish-based company People & Technology, a company that is very committed to providing solutions for exactly the kind of environmental challenge we are taking up on our heads.
14 Apr 2021
Brilliant performance to the point at virtual.drupa
Digital inkjet printing of water-based overprint varnish as the final stage of print finishing - no problem with the RC1536A printhead from Seiko Instruments.
Seiko Instruments will be participating at virtual.drupa and unveiling the result of a collaboration between four companies - a small web press that selectively and precisely applies water-based glossy varnish to a pre-printed web by inkjet.
ACTEGA Terra GmbH has developed a glossy water-based overprint varnish for packaging applications on absorbent and non-absorbent substrates.
Water-based liquids are very demanding in terms of their behaviour during jetting and their drying properties. For this reason, the right equipment for applying the liquids is important.
For the Seiko RC1536A recirculating inkjet printhead, this new generation fluid technology is no challenge. The high flow rate within its recirculation system directly behind the nozzles enables the long "open time" needed to achieve high quality in a wide range of finishing applications.
Available for water-based fluids, the company's flagship printhead is now ready for textile printing and in particular the printing of high-quality embellishments, in addition to many other areas such as coding and marking, printing on corrugated board and 3D printing.
With its aNIR® technology, adphos Digital Printing GmbH has realised the complete drying of the water-based liquid in the shortest intervals.
And the machine builder and integrator for inkjet systems, ideeGO GmbH, has set up a roll-to-roll machine, in which their newly developed "Hive" print bar has also been integrated, on a laboratory scale.
This prototype has been continuously tested for several months now in the laboratory of Seiko's new service centre at their headquarters near Frankfurt (Main), Germany. The laboratory has been officially opened and the machine can also be visited in person.
Please also visit on this topic Seiko´s Live-Websession at virtual.drupa on 22.04.2021 at 1:20 pm.
Seiko Instruments will be participating at virtual.drupa and unveiling the result of a collaboration between four companies - a small web press that selectively and precisely applies water-based glossy varnish to a pre-printed web by inkjet.
ACTEGA Terra GmbH has developed a glossy water-based overprint varnish for packaging applications on absorbent and non-absorbent substrates.
Water-based liquids are very demanding in terms of their behaviour during jetting and their drying properties. For this reason, the right equipment for applying the liquids is important.
For the Seiko RC1536A recirculating inkjet printhead, this new generation fluid technology is no challenge. The high flow rate within its recirculation system directly behind the nozzles enables the long "open time" needed to achieve high quality in a wide range of finishing applications.
Available for water-based fluids, the company's flagship printhead is now ready for textile printing and in particular the printing of high-quality embellishments, in addition to many other areas such as coding and marking, printing on corrugated board and 3D printing.
With its aNIR® technology, adphos Digital Printing GmbH has realised the complete drying of the water-based liquid in the shortest intervals.
And the machine builder and integrator for inkjet systems, ideeGO GmbH, has set up a roll-to-roll machine, in which their newly developed "Hive" print bar has also been integrated, on a laboratory scale.
This prototype has been continuously tested for several months now in the laboratory of Seiko's new service centre at their headquarters near Frankfurt (Main), Germany. The laboratory has been officially opened and the machine can also be visited in person.
Please also visit on this topic Seiko´s Live-Websession at virtual.drupa on 22.04.2021 at 1:20 pm.
23 Jun 2020
There are many good print heads in the market, the service makes the difference.
Seiko Instruments GmbH expands its laboratory and integrates a platform for knowledge exchange.
In order to be able to support our European customers directly and promptly in developing their printing
solutions for a wide range of applications, we had already established a technical laboratory in our Paris
office in March 2017.
Today, just about 3 years later, our laboratory has already become too small to be able to continuously
support our customers to the extent we desire.
This shows how great the demand for prompt, individual service under expert guidance is. On one hand,
this has led us to expand our laboratory, but on the other hand, the idea of creating a platform for
communication has matured in us.
A platform that will now enable us to hold training courses and seminars; a meeting place for the exchange
of knowledge.
Directly connected to our parent company, near Frankfurt am Main, our new service center now offers in an
area of around 250 sqm both a modern well-equipped laboratory but also a training room for up to 30
persons.
In the laboratory, a drop analyser, equipped with a stroboscope and a camera with a resolution of 1292 x
964 pixels, enables the recording of single drops in flight. The camera is calibrated with an accuracy of 1
micrometer.
Based on the measurements of drop velocity, drop volume, drop shape, ligament length and the flight path
itself, as well as the determination of the quantity and the distribution of the satellite droplets, the
waveforms can now be adjusted in a targeted manner.
Optimally adapted oscillation pulses of the waveform generator generate printing results that are finely
tuned to individual requirements.
Test prints on a roll printer and a linear printing unit confirm drop accuracy and print stability.
The definition of an optimal drop formation is based on the target speed of 7m/sec @ a print gap of 3mm
from the nozzle surface, a stable flight and the reduction of satellite drops.
Fully certified by the Japanese parent company, we continuously test the compatibility of the ink creations
with our print heads in cooperation with the ink manufacturers.
Ovens are used to simulate the aging process of the materials, which are then observed under the
microscope for any relative deformation and with a high-precision weighing scale we can check if there is a
weight loss or weight gain ot the test materials.
Apart from the laboratory activities, our technical team also assists our customers in the development of
peripheral components for the production of complete inkjet printing systems and also provides support for
initial installations on site.
The highest level of expertise in the latest printing technologies enables us to offer a wide range of
customer-specific solutions.
In addition to the ISO 9001 certification, the laboratory will also be certified by TÜV according to the
international environmental management standard ISO 14001.
This standard sets out globally recognised requirements for an environmental management system and
includes numerous other standards, such as those relating to life cycle assessments, environmental
performance indicators and many more.
And our new training room?
Digital inkjet is relatively new in the markets, with viewer or no experience in the different applications.
Thereby making it necessary to discuss and develope new ideas with a complete open mind set, which
Seiko would like to bring on the table in the new training center.
Moreover the reliable technical service and the associated constant support we provide to our customers
has been one of our most important product features and is something we have always been comitted to.
Especially such a technically complex subject as digital printing requires an interlocking of all relevant
components and paramenters like the gear wheels of a clockwork.
The best printing results can only be achieved if problem solutions are viewed holistically, objectively and
purposefully, based on a sincere cooperation.
We would like to offer the possibility for this joint work in our company. Gladly offering the required
infracture for a technical cooperation with the various members of a project.
We are looking forward to welcoming you personally and working with you together in developing the future of printing.
In order to be able to support our European customers directly and promptly in developing their printing
solutions for a wide range of applications, we had already established a technical laboratory in our Paris
office in March 2017.
Today, just about 3 years later, our laboratory has already become too small to be able to continuously
support our customers to the extent we desire.
This shows how great the demand for prompt, individual service under expert guidance is. On one hand,
this has led us to expand our laboratory, but on the other hand, the idea of creating a platform for
communication has matured in us.
A platform that will now enable us to hold training courses and seminars; a meeting place for the exchange
of knowledge.
Directly connected to our parent company, near Frankfurt am Main, our new service center now offers in an
area of around 250 sqm both a modern well-equipped laboratory but also a training room for up to 30
persons.
In the laboratory, a drop analyser, equipped with a stroboscope and a camera with a resolution of 1292 x
964 pixels, enables the recording of single drops in flight. The camera is calibrated with an accuracy of 1
micrometer.
Based on the measurements of drop velocity, drop volume, drop shape, ligament length and the flight path
itself, as well as the determination of the quantity and the distribution of the satellite droplets, the
waveforms can now be adjusted in a targeted manner.
Optimally adapted oscillation pulses of the waveform generator generate printing results that are finely
tuned to individual requirements.
Test prints on a roll printer and a linear printing unit confirm drop accuracy and print stability.
The definition of an optimal drop formation is based on the target speed of 7m/sec @ a print gap of 3mm
from the nozzle surface, a stable flight and the reduction of satellite drops.
Fully certified by the Japanese parent company, we continuously test the compatibility of the ink creations
with our print heads in cooperation with the ink manufacturers.
Ovens are used to simulate the aging process of the materials, which are then observed under the
microscope for any relative deformation and with a high-precision weighing scale we can check if there is a
weight loss or weight gain ot the test materials.
Apart from the laboratory activities, our technical team also assists our customers in the development of
peripheral components for the production of complete inkjet printing systems and also provides support for
initial installations on site.
The highest level of expertise in the latest printing technologies enables us to offer a wide range of
customer-specific solutions.
In addition to the ISO 9001 certification, the laboratory will also be certified by TÜV according to the
international environmental management standard ISO 14001.
This standard sets out globally recognised requirements for an environmental management system and
includes numerous other standards, such as those relating to life cycle assessments, environmental
performance indicators and many more.
And our new training room?
Digital inkjet is relatively new in the markets, with viewer or no experience in the different applications.
Thereby making it necessary to discuss and develope new ideas with a complete open mind set, which
Seiko would like to bring on the table in the new training center.
Moreover the reliable technical service and the associated constant support we provide to our customers
has been one of our most important product features and is something we have always been comitted to.
Especially such a technically complex subject as digital printing requires an interlocking of all relevant
components and paramenters like the gear wheels of a clockwork.
The best printing results can only be achieved if problem solutions are viewed holistically, objectively and
purposefully, based on a sincere cooperation.
We would like to offer the possibility for this joint work in our company. Gladly offering the required
infracture for a technical cooperation with the various members of a project.
We are looking forward to welcoming you personally and working with you together in developing the future of printing.
About us
Company portrait
The modern-day Seiko Group evolved from a watch business founded by Kintaro Hattori in Tokyo, Japan, in 1881. We, Seiko Instruments GmbH based in Neu-Isenburg, Germany, were founded as a company in 1983 to handle sales in Europe, the Middle East and Africa (EMEA). Our product portfolio comprises micro batteries, quartz crystals, thermal printers and industrial printheads.
Approximately 50 employees in the areas of sales, marketing, technology and administration are responsible for expertly and reliably assisting our customers. Fast and efficient support is made possible by our international corporate structure.
From our modern logistics centre located next to Frankfurt Rhein-Main international airport we deliver our goods safely and speedily to their destinations all over the world. We have established a technical laboratory that enables us to test material compatibilities and simulate production workflows.
Our highly motivated team nurtures strong and lasting business relations with our customers thanks to the traditionally responsible way in which we interact with others.
Approximately 50 employees in the areas of sales, marketing, technology and administration are responsible for expertly and reliably assisting our customers. Fast and efficient support is made possible by our international corporate structure.
From our modern logistics centre located next to Frankfurt Rhein-Main international airport we deliver our goods safely and speedily to their destinations all over the world. We have established a technical laboratory that enables us to test material compatibilities and simulate production workflows.
Our highly motivated team nurtures strong and lasting business relations with our customers thanks to the traditionally responsible way in which we interact with others.
Company data
Number of employees
50-99
Foundation
1983
